Skip to content Skip to footer
0 items - $0.00 0
ShopVelox
0 items - $0.00 0
ShopVelox

Pinewood Derby Complete Car Kits Talon with canopy

Close
Talon Pinewood Derby Car 1.180" Wheel

Pinewood Derby Complete Car Kits Talon with canopy

$49.95

Fast Pinewood derby kits! BSA – compliant complete pinewood derby car. Before your purchase, please check your local rules. If you are unsure about the terminology, just email us, we will get you what you need. See what makes our kits different! 9 different reasons. All Kits are 7 inches in length. All kits are 1.75 inches in width. All kits have a minimum ground clearance of 3/8 of an inch. All kits are under 1.25 inches in height unless stated otherwise.

What makes our kits different than everyone else? Our kits come with those speed tips that everyone says to use and leaves it up to you to figure it out. Finally a kit that will compete against the derby dads! Our kits come with the speed tips and secrets that everyone charges you to buy their info. With our kit, and a little work on your end, you can dominate your race!

Leave them in the Dust with Axle and Wheel Upgrade OptionsMore INFO

955 in stock

Wheel Base

Axle Polish

Axle Polish Level

Bent Axles

Wheel Type _ Check Your Rules

SKU: Talonkit Categories: , Product ID: 18742

Description

HOW TO PUT IT TOGETHER

Fast Pinewood derby kits!  BSA– compliant, pinewood derby car.  Before your purchase, please check your local rules.  If you are unsure about the terminology, just email us, we will get you what you need.

Each kit contains:

Pinewood derby car with standard BSA slots

  • Weighted car to 120-124 grams (very close to final weight of 5oz)
  • 4x BSA Wheels –machined, lathed — ready to race
  • 4x BSA Axles– deburred, shaped, straightened, and polished –ready to race
  • The Perfect Gap™ wheel gauge
  • 4x cotton buffing sticks
  • Sample of Derby Dust® Dry Lube

  • This is the most complete Ready to race kit on the market today. Get the body primed to save even more time.

 

Tools need to complete you kit:  Sandpaper, wood filler, and paint.  Installation instructions can be found here:  How to build Your Pinewood Derby Car

Optional but highly recommended: Graphite  Gap Gauge  Tuning Pliers  Fine tipped Sharpie  Masking/Painter’s tape  Heavy duty cotton Pipe cleaner

 

Prep time:  1 hour to install parts.  1 day of painting time.

How to tune and align your Pinewood Derby Car!

Reviews

There are no reviews yet.

Be the first to review “Pinewood Derby Complete Car Kits Talon with canopy”

Your email address will not be published. Required fields are marked *

Related products

Pinewood Derby ® Wheels and Axles

My proven and tested theory shows that you can get the most of of your Pinewood Derby ® car with my Pinewood Derby ® speed axles and Pinewood Derby ® speed wheels while still being 100% legal ! Complete Sets with axles, wheels, cotton applicators, gap gauge, and dry graphite lube. Speeds measured at bottom of curve reaching 17fps with speeds of up to 15.5fps at the last 10 feet of track.
Top speeds are achieved with lighter wheels. Go as light as your rules allow!

Let's do some shopping
Address

San Antonio, TX 78278

blair@shopvelox.com

1-210-219-3877
Quick access
Get In Touch

Copyright © 2022 Machine Envy, LLC. All Rights Reserved.
Derby Dust® is a registered trademark of Machine Envy, LLC.
Machine Envy, LLC is neither affiliated with nor endorsed by the Boy Scouts of America. Pinewood Derby® is a registered trademark of Boy Scouts of America.
Derby Worx® is a registered trade mark of Derby Worx, Inc.
Awana® is a Registered Trademark of Awana Clubs International. Machine Envy, LLC is neither affiliated with nor endorsed by the Awana Clubs International.