Skip to content Skip to footer

Pinewood Derby Car Body ONLY — “Physics Lecture”

$19.95

Fast Pinewood car body! BSA – compliant complete pinewood derby car. Before your purchase, please check your local rules. If you are unsure about the terminology, just email us, we will get you what you need. All Bodies are 7 inches in length. All kits are 1.75 inches in width. All kits have a minimum ground clearance of 3/8 inches. All kits are under 1.25 inches in height unless stated otherwise.

What makes our cars different than everyone else? Our car bodies come with those speed tips that everyone says to use and leaves it up to you to figure it out. Finally a car that will compete against the derby dads! Our car bodies come with the speed tips and secrets that everyone charges you to buy their info. With our kit, and a little work on your end, you can dominate your race!

Scroll down to learn more info.

962 in stock

SKU: SKU16151 Category: Product ID: 18423

Description

Physics Lecture.  Many, many races have been won with this design.  This design is the favorites of one of the Pinewood Derby “Gods”  Lots of information regarding this design if you look for it.  We have done the major steps for you!

This is for a Pinewood Derby Car Body ONLY which means NOT ready to Race! Most of the major parts are done. This lets you and your scout put the final touches on the car. You will still need to tune your car. You will still need to paint and assemble your car.

 

You will still need BSA wheels and axles to complete this Pinewood Derby Car. We sell complete kits with prepped wheels and axles.

Each car body:

Pinewood derby car with either BSA slots or Drilled Extended wheel base (your choice)

  • If choosen Weighted car to 120-124 grams (very close to final weight of 5oz)
  • Custom drilled weight holes / pocket depending on your needs

Why our cars are better!

How many cars come weight balanced? Our cars are perfected balanced for speed. Weight balanced ½-1” in front of rear axle for maximum potential energy. Does it matter where the center of gravity is? Absolutely! Our bodies are brought up to 124 grams of weight. With 3 light coats of paint and a regular set of wheels and axles this should be extremely close to 5oz. Additional add-ons may cause your car to be overweight.

 

Pinewood derby car kit ready to assemble Pinewood derby car kit ready to assemble

Red car is theirs, bare wood is ours.

 Our bodies are low profile in front with larger profile in back. What does this do? It has to do with aerodynamics and decreasing drag. We don’t waste your time with big bulky cars!

Most of our bodies utilize a quick start front end. By having an upward tapered front end, this allows your car to release from the starting gate sooner than if you had a lower tapered front end. It sounds crazy, but your car could start down the track before the others!

pinewood Derby Car kit

 

You will still need BSA wheels and axles to complete this Pinewood Derby Car. We sell complete kits with prepped wheels and axles. 

Tools need to complete you kit:

  • Sandpaper
  • Wood filler
  • Paint and Decals
  • Hammer to Install Axles
  • Simple installation instructions included

 

Optional but highly recommended:

  • Graphite
  • Gap Gauge
  • Fine tipped
  • Tuning Pliers
  • Cotton Applicator
  • Sharpie Masking/Painter’s tape
  • Derby Worx Axle Install Guide
  • Pinewood Derby Axle Install Tool

 

Prep time: 1 hour to install parts. 1 day of painting time.

How to tune and align your Pinewood Derby Car!

Reviews

There are no reviews yet.

Be the first to review “Pinewood Derby Car Body ONLY — “Physics Lecture””

Your email address will not be published. Required fields are marked *

Pinewood Derby ® Wheels and Axles

My proven and tested theory shows that you can get the most of of your Pinewood Derby ® car with my Pinewood Derby ® speed axles and Pinewood Derby ® speed wheels while still being 100% legal ! Complete Sets with axles, wheels, cotton applicators, gap gauge, and dry graphite lube. Speeds measured at bottom of curve reaching 17fps with speeds of up to 15.5fps at the last 10 feet of track.
Top speeds are achieved with lighter wheels. Go as light as your rules allow!

Address

San Antonio, TX 78278

Quick access
Get In Touch

Copyright © 2022 Machine Envy, LLC. All Rights Reserved.
Derby Dust® is a registered trademark of Machine Envy, LLC.
Machine Envy, LLC is neither affiliated with nor endorsed by the Boy Scouts of America. Pinewood Derby® is a registered trademark of Boy Scouts of America.
Derby Worx® is a registered trade mark of Derby Worx, Inc.
Awana® is a Registered Trademark of Awana Clubs International. Machine Envy, LLC is neither affiliated with nor endorsed by the Awana Clubs International.